Alloy Steel WP9 Short Radius Elbow Supplier, Alloy Steel 3d Pipe Bend, Alloy Steel WP9 Pipe Reducer, Chrome Moly WP9 Pipe Elbow, Alloy Steel WP9 Pipe Fittings, ASME SA234 Chrome Moly Alloy Steel Gr. WP9 Cross Exporter in India, A234 WP9 Buttweld Fittings, ASTM A234 Wp9, ASTM A234 Buttweld Fittings.

Alloy Steel WP9 Buttweld Fittings

Alloy Steel WP9 Buttweld Fittings

Ganpat Industrial Corporation is a known trader, manufacturer and exporter of Alloy Steel WP9 Pipe Fittings, which should be used in nitric acid only in solutions of up to 0.5 % concentration at room temperature. The rate of these Alloy Steel WP9 Elbow Butt Weld Pipe Fittings increases with increases in the sulphur dioxide content of the atmosphere (such as might occur in industrial areas). In pure un – aerated acid, corrosion rates of Alloy Steel WP9 Equal Tee are low for all concentrations at atmospheric temperatures. In hot or concentrated solutions, rates of these Alloy Steel WP9 Cross Butt Weld Pipe Fittings are usually too high for reasonable service life. The salts in Alloy Steel WP9 Reducer may develop when hydrochloric acid comes in contact with iron and copper. This is due to the reduced tendency to precipitate deleterious intermetallic phases in these Alloy Steel WP9 Stub End, thereby, affording it greater ductility than other alloys during and following various thermal cycling conditions. Alloy Steel WP9 End Cap Butt Weld Pipe Fittings can be welded by all common welding techniques, although oxyacetylene and submerged arc welding processes are not recommended when the fabricated item is to be used in corrosive service. Special precautions for these Alloy Steel WP9 Dish Cap Butt Weld Pipe Fittings should be taken to avoid excessive heat input.

Alloy Steel WP9 Equal Tee, Alloy Steel 1.5d Pipe Bend, Supplier of Alloy Steel WP9 45 degree Elbow, ASTM A234 Alloy Steel WP9 Long Stub, Alloy Steel WP9 End Cap, Alloy Steel Gr. WP9 90 degree Elbow Suppliers in Mumbai, India.

Alloy Steel WP9 pipe fittings

 

Alloy Steel WP9 Lateral Tee
Alloy Steel WP9 Long Stub End
Alloy Steel WP9 Long & Short Radius Elbow
Alloy Steel WP9 Pipe Fitting
Alloy Steel WP9 45 degree Elbow

Alloy Steel 10d Pipe Bend, Alloy Steel WP9 Seamless Pipe Fittings, Alloy Steel WP9 180 Deg Bend, ANSI A234 Alloy Steel WP9 Buttweld Fittings, ANSI B16.9 Alloy Steel WP9 Welded Butt weld Fittings, Alloy Steel WP9 Pipe bend Exporter in India, Alloy Steel Buttweld Fittings, Alloy Steel Pipe Fitting, Alloy Steel Elbows.

Alloy Steel WP9 Pipe Fittings Specifications
Specifications : ASTM A234 / ASME SA234
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Standards
: ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
Type : Seamless / Welded / Fabricated

Types of Alloy Steel WP9 Buttweld Fittings

Alloy Steel WP9 45 Degree Elbow Alloy Steel WP9 45 Degree Elbow Alloy Steel WP9 45 Degree Elbow
Alloy Steel WP9 Buttweld 45 Deg. Elbow
WP9 Alloy Steel 45 Degree Elbow
Chrome Moly WP9 45 Degree Elbow
Alloy Steel WP9 45 Degree Elbow
ASME A234 Alloy Steel WP9 90 Degree Elbow
Alloy Steel WP9 Pipe Fitings Alloy Steel WP9 Pipe Fittings Alloy Steel WP9 Pipe Fittings
Chrome Moly WP9 Buttweld Fitting
WP9 Alloy Steel Pipe Fitting
Alloy Steel WP9 Buttweld Fitting
Alloy Steel WP9 Pipe Fittings
ASTM A234 Alloy Steel WP9 45 Buttweld Fitting
Alloy Steel WP9 Eccentric Reducer Alloy Steel WP9 Eccentric Reducer Alloy Steel WP9 Eccentric Reducer
WP9 Alloy Steel Eccentric Reducer
Chrome Moly Eccentric Reducer
Alloy Steel WP9 Eccentric Reducer
Alloy Steel WP9 Eccentric Reducer
ASTM A234 Alloy Steel WP9 Eccentric Reducer
Alloy Steel WP9 Concentric Reducer Alloy Steel WP9 Concentric Reducer Alloy Steel WP9 Concentric Reducer
WP9 Alloy Concentric Reducer
Chrome Moly WP9 Concentric Reducer
Alloy Steel WP9 Concentric Reducer
Alloy Steel WP9 Concentric Reducer
ANSI B16.9 Alloy Steel WP9 Concentric Reducer
Alloy Steel WP5 Lateral Tee Alloy Steel WP9 Lateral Tee Alloy Steel WP9 Lateral Tee
WP9 Alloy Steel Lateral Tee
Chrome Moly WP9 Lateral Tee
Alloy Steel Grade WP9 Lateral Tee
Alloy Steel Gr, WP9 Lateral Tee
ASME SA234 Alloy Steel WP9 Lateral Tee
Alloy Steel WP9 Equal Tee Alloy Steel WP9 Equal Tee Alloy Steel WP9 Equal Tee
WP9 Alloy Steel Equal Tee
Chrome Moly WP9 Equal Tee
Alloy Steel Grade WP9 Equal Tee
Alloy Steel WP9 qual Tee
ASTM A234 Alloy Steel WP9 Equal Tee
Alloy Steel WP9 Long Stub End Alloy Steel WP9 Long Stub End Alloy Steel WP9 Long Stub End
Alloy Steel WP9 Stub End
WP9 Alloy Steel Long Stub End
Chrome Moly Long Stub End
Alloy Steel Grade WP9 Long Stub End
ASTM A234 Alloy Steel WP9 Long Stub End
Alloy Steel WP9 Short Stub End Alloy Steel WP9 Short Stub End Alloy Steel WP9 Short Stub End
Chrome Moly WP9 Short Stub End
WP9 Alloy Short Stub End
Alloy Steel WP9 Short Stub End
Alloy Steel Grade WP9 Short Stub End
MSS-SP-43 Alloy Steel WP9 Short Stub End
Alloy Steel WP9 End Cap Alloy Steel WP9 End Cap Alloy Steel WP9 End Cap
Chrome Moly Gr. WP9 End Cap
WP9 Alloy Steel End Cap
Alloy Steel WP9 End Cap
Alloy Steel Gr. WP9 End Cap
ASTM A234 Alloy Steel WP9 End Cap
Alloy Steel WP9 Bend Alloy Steel WP9 Bend Alloy Steel WP9 Pipe Bend
Alloy Steel 5d Pipe Bend
Alloy Steel Grade WP9 Bend
Chrome Moly WP9 Pipe Bend
Alloy Steel Gr. WP9 Bend
ASTM A234 Alloy Steel WP9 Bend
Alloy Steel WP9 Equal Cross Alloy Steel WP9 Equal Cross Alloy Steel WP9 Equal Cross
WP9 Alloy Steel Equal Cross
WP9 Alloy steel Equal Cross
Alloy Steel WP9 Equal Cross
Alloy Steel Grade WP9 Equal Cross
ANSI A234 Alloy Steel WP9 Equal Cross

Alloy Steel WP9 Pipe Fittings Chemical Composition

Grade C Mn Si S P Cr Mo
A234 WP9
≤0.15 ≤0.6 1.00 ≤0.03 ≤0.03 8-10 0.99-1.10

Alloy Steel WP9 Buttweld Fittings Mechanical Properties

Grade Tensile Strength (Mpa) Yield Strength (Mpa) Elongation %
A234 WP9
380 min 585 min ≥30

Dimensions & weight chart of Alloy Steel WP9 Pipe Fittings

NPS (Normal Pipe Size) O.D. (Outside Daimeter) Elbow 90 Deg Elbow 45 Deg Return Elbow 180 Deg
(inch) Long Radius Elbow Short Radius Long Radius Elbow Long Radius Elbow
(millimeter/ MM) (inch./ Inches) Center to Face
(Inches)
Center to Face
(Inches)
Center to Face
(Inches)
Radius
(Inches)
Center to Center
(Inches)
Back to face
(Inches)
1/2 21.3 0.840 1 1/2 5/8 2 1 7/8
3/4 26.7 1.050 1 1/8 7/16 2 1/4 1 11/16
1 33.4 1.315 1 1/2 1 7/8 3 2 3/16
1 1/4 42.2 1.660 1 7/8 1 1/4 1 3 3/4 2 3/4
1 1/2 48.3 1.900 2 1/4 1 1/2 1 1/8 3 4 1/2 3 1/4
2 60.3 2.375 3 2 1 3/8 4 6 4 3/16
2 1/2 73.0 2.875 3 3/4 2 1/2 1 3/4 5 7 1/2 5 3/16
3 88.9 3.500 4 1/2 3 2 6 9 6 1/4
3 1/2 101.6 4.000 5 1/4 3 1/2 2 1/4 7 10 1/2 7 1/4
4 114.3 4.500 6 4 2 1/2 8 12 8 1/4
5 141.3 5.563 7 1/2 5 3 1/8 10 15 10 5/16
6 168.3 6.625 9 6 3 3/4 12 18 12 5/16
8 219.1 8.625 12 8 5 12 24 16 5/16
10 273.1 10.750 15 10 6 1/4 15 30 20 3/8
12 323.9 12.750 18 12 7 1/2 18 36 24 3/8

Pressure Rating of ASTM A234 Gr WP9

Pressure-Temperature ratings for ASME B16.9 ASTM A234 WP9 Pipe Fittings(psig)
Temperature Ratings Pressure Class
150 300
1/4 – 1 Inches 1 1/4 – 2 Inches 2 1/2 – 3 Inches
(oF) (oC)
-20 to 150 -29 to 66 300 2000 1500 1000
200 93 265 1785 1350 910
250 121 225 1575 1200 825
300 149 185 1360 1050 735
350 177 150 1150 900 650
400 204 935 750 560
450 232 725 600 475
500 260 510 450 385
550 288 300 300 300

Alloy Steel WP9 Fittings Price List

  • Alloy Steel WP9 Buttweld Fittings
    US $1-5 / Piece (FOB Price)
  • Alloy Steel WP9 Pipe Fitting
    US $0.07 / Piece
  • Alloy Steel WP9 Buttweld Fitting
    US $0.01-3 / Piece (FOB Price)
  • ASTM A234 Alloy Steel WP9 Buttweld Fitting
    US $0.1-0.2 / Piece (FOB Price)
  • Alloy Steel WP9 Pipe Fittings
    US $1-5 / Piece (FOB Price)

Alloy Steel WP9 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel WP9 Buttweld Fitting Test Certificates

We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

ASTM, ASME Alloy Steel WP9 Buttweld Pipe Fittings Value Added Services

Material Testing:
We at Ganpat Industrial Corporation ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Alloy Steel WP9 Pipe Fittings Packaging
Alloy Steel WP9 Buttweld Fittings Packing Alloy Steel WP9 Pipe Fittings PackagingAlloy Steel WP9 Buttweld Fitting are individually wrapped by hand to ensure that the high quality of the material is maintained and no damage in the last stages of production. We recommend Plywood cases or pallet packaging to ensure safe packaging and prompt delivery of the ordered consignment. Alloy Steel WP9 Buttweld Fitting come with imprints relevant to the job information (eg, heat number, size, material and part number). This information is also printed along all delivered Industrial Buttweld Fittings.

Alloy Steel WP9 Pipe Fittings Manufacturer Popular Searches

Alloy Steel WP9 pipe fittings price list, Alloy Steel WP9 Pipe Fittings, A234 Alloy Steel WP9 chemical composition, A234 Alloy Steel WP9 fittings, Alloy Steel WP9 fittings price, Alloy Steel WP9 pipe fittings manufacturers in india, Alloy Steel WP9 elbow dimensions, Alloy Steel WP9 elbow price, schedule 10 A234 Alloy Steel WP9 Fittings, Alloy Steel WP9 B3 Schedule 40 pipe fittings, Alloy Steel WP9 weldable pipe fittings, buy Copper Alloy Steel WP9 pipe fittings, Top Quality Alloy Steel WP9 Reducer, Astm A234 special Alloy Steel WP9 WP9 Pipe Fittings, a234 wp9 buttweld fittings, astm a234 wp9, astm a234 buttweld fittings, alloy steel buttweld fittings, alloy steel pipe fitting, alloy steel elbows.

Alloy Steel WP9 Pipe Fittings Supplier

Afghanistan, Russia, Bolivia, Thailand, Yemen, Algeria, Kenya, Argentina, Estonia, Serbia, Switzerland, Saudi Arabia, Puerto Rico, China, United States, Ghana, Mexico, Zimbabwe, Malaysia, Croatia, Netherlands, Canada, Bahrain, Iraq, Greece, Sri Lanka, Ukraine, Tibet, Bhutan, Chile, Azerbaijan, Germany, Italy, Macau, Bulgaria, United Kingdom, New Zealand, Trinidad & Tobago,Tunisia, Jordan, Oman, Poland, Iran, Kuwait, Egypt, Poland, Mongolia, Bangladesh, Belarus, Angola, Finland, Costa Rica, Australia, Brazil, Sweden, Peru, Belgium, Gabon, Nepal, Slovakia, Lithuania, Pakistan, Spain, Venezuela, Philippines, Qatar, France, Morocco, Singapore, Turkey, Nigeria, Libya, Hungary, India, Namibia, Romania, United Arab Emirates, Mexico, Nigeria, Austria, Iran, Lebanon, Indonesia, Denmark, Portugal, Ireland, Gambia, Japan, Kazakhstan, Czech Republic, Ecuador, South Korea, Israel, Vietnam, Taiwan, Hong Kong, Norway, Chile, South Africa, Colombia.

Alloy Steel WP9 Buttweld Fittings Exporter

Gurgaon, Thane, Visakhapatnam, New Delhi, Jeddah, Geoje-si, New York, Thiruvananthapuram, Kolkata, Gimhae-si, Vadodara, Singapore, Rajkot, Noida, Al Khobar, Colombo, Muscat, Pune, Mumbai, Nashik, Santiago, Indore, Riyadh, Faridabad, Chennai, Secunderabad, Baroda, Chiyoda, Kuala Lumpur, Caracas, Kanpur, Ankara, Bhopal, Kuwait City, Port-of-Spain, Courbevoie, Ulsan, Ahmedabad, Rio de Janeiro, Nagpur, Busan, Montreal, Brisbane, Manama, Lahore, Ranchi, Sydney, Granada, Aberdeen, Seoul, Abu Dhabi, Houston, Mexico City, Bogota, Jaipur, Hanoi, Vung Tau, Madrid, Surat, Milan, Chandigarh, Toronto, Hong Kong, Los Angeles, Edmonton, Ernakulam, Coimbatore, Howrah, Moscow, Algiers, Al Jubail, Istanbul, Hyderabad, Dubai, Doha, Ho Chi Minh City, Dammam, Pimpri-Chinchwad, Ludhiana, Jamshedpur, Melbourne, Cairo, Dallas, Navi Mumbai, Lagos, Jakarta, London, Atyrau, La Victoria, Bengaluru, Haryana, Perth, Petaling Jaya, Calgary, Ahvaz, Karachi, Sharjah, Bangkok, Tehran.